Universal 1” or 1.1” Removable Install Chassis
Universal 1” or 1.1” Removable Install Chassis
Universal 1” or 1.1” Removable Install Chassis
Universal 1” or 1.1” Removable Install Chassis
Universal 1” or 1.1” Removable Install Chassis
Universal 1” or 1.1” Removable Install Chassis
Universal 1” or 1.1” Removable Install Chassis

Universal 1” or 1.1” Removable Install Chassis

Regular price$15.00
/
Shipping calculated at checkout.

Soundboard
Full Parts Kit

Fully removable install chassis designed for hilts with at least a 1" inner diameter, or 1.1" inner diameter for the grip section. 

This is a DIY kit. All assembly and installation is the responsibility of the end user. Please refer to your soundboard's manual for proper wiring diagrams and applications. 

Please read all instructions and details about this product below before purchasing. These chassis products are made to order and not eligible for returns or replacements due to wrong products or sizes being ordered that may or may not fit your saber hilt.

Hilt requirements:

At least a 1" inner diameter all the way through. Thin neck sabers or sabers that narrow to a less than 1" inner diameter will not work. 
Your hilt must also be able to use some kind of switch plunger or actuator to press down onto the tactile switch PCB's built into the chassis. There are several switch plunger or actuator options here on the page, or you can use your own or another third party. Also requires a retention screw somewhere in the general vicinity above the switch area. This is used for chassis retention and proper alignment. Most hilts will have one for the heatsink or neopixel holder but if you do not have one, you can always drill and tap your own.

PRODUCT DESCRIPTION AND PARTS INCLUDED:

Total chassis length is 7 5/16" in length. Please ensure you have adequate space for the chassis in your hilt. This length does not include the speaker. 

1" chassis version is 1" in outer diameter all the way throughout the chassis. 
1.1" chassis version is 1.1" in the speaker area only, the rest of the chassis is 1"

Parts list for install:
-CFX, Proffie, GHV3 or Verso
-up to two Tactile Switch PCB's (two are included with chassis print)
-NPXL shortpin hilt side connector
-removable 18650 button top protected cell
-28mm bass speaker for 1.1" chassis options, 22mm speaker for 1" chassis options

FULL PARTS KIT includes:
-choice of soundboard (CFX, ProffieV3.9, GHV3)
-qty. 1 assembled NPXL V3 shortpin hiltside connector
-qty.1 KeepPower 18650 3000mah 15A button top protected cell
-qty.1 28mm X-BASS 4ohm/3W bass speaker or 22mm Veco speaker

 

You may also like