SaberTec Quantum Strip

The newest in neopixel blade technology, the Quantum LED strip, designed and manufactured by Sabertec!
The ultimate LED's for making neopixel blades; eliminate side shadowing and illuminate the tip of your blades for the most rewarding blade experience on the market.

These measure approx. 34.5" in length for the stand alone LED strips
Fully made pixel blades measure approximately 35.5" in total length
These blades are not recommended for dueling and should be used for display and show purposes only

For proper wiring of the solder pads: ‘GND’ is for negative wire, ‘DI’ is for data wire, ‘5V’ is for positive wire

DIY kits include:
-Quantum LED strip
-1" thin walled or 7/8" thin walled blade, foam, diffusion material, blade tip, blade side PCB, and blade side PCB holder

Pre-made Quantum blades available for both 1" and 7/8" thin walled versions, with a sanded blade finish, both in 35.5" length

*Please reach out for inquiries on bulk ordering for quantities of 10 or more*

- 131 Pixel, allowing high-resolution lighting without slowing down animations

- 526 LEDs with SK6812 chipset, including 262 top-emitting and 264 side-emitting LEDs for superior brightness and elimination of side shadows

-Data line is PRE-RESISTORED (You will still need to bridge the SMD resistor gap on your blade side PCB for DIY install)

- Capacitors ensure smooth supply voltage of every single LED

- Illuminated tip for a realistic lightsaber look

- Rounded tip design, allowing easy insertion into the blade tube

- Length of 88 cm, ideal for standard lightsaber blades

- Advanced design minimizes internal resistance, maintaining stable colors and brightness along the LED strip

- Optimized heat dissipation ensures extended brightness and prolonged LED lifespan

- Redundant sets of soldering pads on both sides for easy soldering, enabling high loads
- High-drain batteries recommended to get the best results

-per LED/color current draw approx. 12mah (based on 5V power source, should be lower depending on voltage of the supplied battery). For a fully charged 4.2V li-on battery, the current draw should be around 5.3A per color (red, green, or blue)

Check out this video showing some run times for a fully charged battery HERE