Oggdo Killer Gen.2 DIY Install Chassis
Oggdo Killer Gen.2 DIY Install Chassis
Oggdo Killer Gen.2 DIY Install Chassis
Oggdo Killer Gen.2 DIY Install Chassis

Oggdo Killer Gen.2 DIY Install Chassis

Regular price$282.00
/
Shipping calculated at checkout.

Soundboard
Add Crystal Chamber?
Full Parts Kit?

3D printed install chassis for the Oggdo Killer hilt, not compatible with other hilt models.
Available as a basic install option or can be ordered with an extra crystal chamber section with included resin printed crystal.
Please note this is intended for DIY purposes and does not come fully installed with electronics.

Parts list for install:
-CFX, Proffie, GHV4, or GHV3 soundboard
-NPXL shortpin hiltside connector
-thin neck PCB set
-single 1.5mm brass tactile switch
-single pixel accent LED(used for both versions)
-SCW Pixel Ring(used for the basic non crystal chamber version)
-removable 18650 protected button top cell(uses Option 2 contacts)
-high amp killswitch
-28mm bass speaker

FULL PARTS KIT includes: 
-choice of soundboard (CFX, ProffieV3.9, GHV4 or GHV3)
-NPXL V4 shortpin hiltside connector (unassembled)
-unassembled thin neck PCB set
-single 1.5mm brass tactile switch
-single pixel accent LED (comes with both options; basic and crystal chamber)
-SCW Pixel Ring(only comes with basic option)
-removable KeepPower 18650 3500mah 15A protected button top cell
-high amp killswitch
-28mm X-BASS 4ohm/3W bass speaker

You may also like